6
15
14
13
16
2
Holes
10
2
3
3
4
3.
Press a 1 1/2” Square Inner Cap (16) into the open
end of the Backrest Frame (2).
Align the indicated holes in the Backrest Frame (2)
with the holes in the Swing Arm (3). Attach the
Backrest Frame to the Swing Arm with the 5/16” x
2 1/2” Bolt (14), the 5/16” Nylon Locknut (13), and
the Locking Pin (15).
Make sure that the Locking
Pin is fully inserted and clipped around the
Swing Arm. Be careful not to overtighten the
Nylon Locknut; the Swing Arm must be able to
pivot for storage.
4.
Press two 1 3/4” Cover Caps (10) onto the Backrest
Frame (2).
5.
Attach the Backrest (1) to the Backrest Frame (2)
with the two 1/4” x 3/4” Screws (6), the 1/4” x 2 1/4”
Screw (9), and the 1/4” Flat Washer (11).
1
2
9
11
6
5
