ProForm PFTL67723.2, Руководство пользователя

Страница: 14 / 40

14
12
12. Connect the Upright Wire (74) to the indicated
wire (H). Make sure to connect the wires as
described above.
Then, connect the console wires (F) to the wires
(I) from the console base (84) and to the Ground
Wire (100). Make sure to connect the wires as
described above.
74
F
H
100
I
84
IMPORTANT: You will connect wires in one or
more of the following steps. For your tread-
mill to function properly, connect the wires as
described below. Note: The actual wires may
look different from the wires shown.
First, firmly push the wires (V) into each connec-
tor (W, X) to make sure that the wires are fully
seated.
Next, turn the wires so that the latch (Y) on one
connector (W) is on the same side as the catch
(Z) on the other connector (X).Then, slide the
connectors together; the connectors should
slide together easily and snap into place with
an audible click.
Then, pull on the connectors (W, X) to make
sure that they are connected; do not pull on the
wires (V). To see a video about connecting
wires, scan the QR code or go to my.iFIT.com.
V
W
X
Y
Z
V