23
HOW TO USE AN ONBOARD WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 20.
2. Select an onboard workout.
To select an onboard workout, press the Speed
button, the Incline button, the Intensity button,
or the Calorie button repeatedly until the desired
workout appears in the display.
When you select an onboard workout, the displays
will show the maximum incline, the duration, the
distance, the maximum speed, and the name of
the workout. In addition, a pro
le of the speed set-
tings of the workout will appear in the matrix. If you
select a calorie workout, the approximate number
of calories you will burn will appear in the name of
the workout.
3. Start the workout.
Press the Start button or the Speed increase but-
ton to start the workout. A moment after you press
the button, the treadmill will automatically adjust to
the first speed and incline settings of the workout.
Hold the handrails and begin walking.
Each workout is divided into segments. One speed
setting and one incline setting are programmed for
each segment. Note: The same speed setting and/
or incline setting may be programmed for consecu-
tive segments.
During the
workout, the
pro
le will
show your
progress. The
ashing seg-
ment of the
pro
le rep-
resents the current segment of the workout. The
height of the
ashing segment indicates the speed
setting for the current segment. At the end of each
segment, a series of tones will sound and the next
segment of the pro
le will begin to
ash. If a new
speed and/or incline setting is programmed for the
next segment, the new speed and/or incline setting
will appear in the displays for a few seconds and
the treadmill will automatically adjust to the new
speed and/or incline setting.
The workout will continue in this way until the last
segment of the pro
le
ashes in the display and the
last segment ends. The walking belt will then slow
to a stop.
Note: The calorie goal is an estimate of the
number of calories that you will burn during
the workout. The actual number of calories
that you burn will depend on various factors
such as your weight. In addition, if you manu-
ally change the speed or incline of the treadmill
during the workout, the number of calories you
burn will be affected.
If the speed or incline setting is too high or too low
at any time during the workout, you can manu-
ally override the setting by pressing the Speed or
Incline buttons;
however, when the next segment
of the workout begins, the treadmill will auto-
matically adjust to the speed and incline set-
tings for the next segment.
To stop the workout at any time, press the Stop
button. The time will begin to flash in the display.
To resume the workout, press the Start button or
the Speed increase button. The walking belt will
begin to move at 1 mph. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
4.
Follow your progress with the displays.
See step 5 on page 21.
5. Measure your heart rate if desired.
See step 6 on page 22.
6. Turn on the fan if desired.
See step 7 on page 22.
7. When you are finished exercising, remove the
key from the console.
See step 8 on page 22.
Current Segment
