1.
Remove the two M10 x 120mm Patch Screws
(78) and the shipping bracket (not shown)
attached to the front of the Frame (1). Discard
the shipping bracket.
Do not discard the two
M10 x 120mm Patch Screws.
Orient the Front Stabilizer (49) with the Wheels
(8) in the position shown. While a second per-
son tips the Frame (1) backward, attach the
Front Stabilizer to the Frame with the two M10 x
120mm Patch Screws (78).
6
2. Identify the Right Handlebar (36), which is
marked with an “R” sticker.
Attach the Right Handlebar (36) to the Frame
(1) with three M8 x 15mm Patch Screws (75).
Attach the Upper Body Cap (34) to the Right
Handlebar (36) with an M6 x 18mm Patch
Screw (108).
Repeat this step for the other side of the
elliptical exerciser.
78
49
1
2
1
1
8
8
108
75
75
36
34
To make assembly easier, read the
information on page 5 before you begin.
