14
HOW TO USE THE MANUAL MODE
Press the Resistance decrease button or
begin pedaling to turn on the console.
A moment after you turn on the console, the dis-
play will light.
Select the manual mode.
Each time you turn on the console, the manual
mode will be selected automatically. If you have
selected a program, reselect the manual mode by
pressing the Programs button repeatedly until the
words MANUAL MODE appear in the display.
Begin pedaling and change the resistance of
the pedals as desired.
As you pedal, change the resistance of the ped-
als by pressing the Resistance increase and
decrease buttons repeatedly. There are ten resis-
tance levels. Note: After you press the buttons, it
will take a moment for the pedals to reach the
selected resistance level.
Follow your progress with the display.
The left side of the
display
—This side of
the display will show
the elapsed time.
Note: When a pro-
gram is selected,
except for the heart rate control program, the dis-
play will show the time remaining in the program
instead of the elapsed time.
The left side of the display will also show your
heart rate when you use the handgrip pulse sen-
sor (see step 5 on this page).
Note: When a program is selected, the left side of
the display will also show the approximate num-
ber of calories you have burned.
The center of the
display
—When you
select the manual
mode, the center of
the display will show
a track that repre-
sents 640 revolutions. As you exercise, indicators
will appear in succession around the track until
the entire track appears. The track will then disap-
pear and the indicators will again begin to appear
in succession.
The center of the dis-
play will also show the
resistance level of the
pedals for a few sec-
onds each time the
resistance level
changes.
The right side of the
display
—This side of
the display will show
the distance, in total
revolutions, you have
pedaled. Note: When
a program is selected, the right side of the display
will also show your pedaling pace in revolutions
per minute (rpm).
The top of the display
—When you select the
manual mode, the top of the display will show the
approximate number of calories you have burned
and your pedaling pace in revolutions per minute
(rpm).
Measure your heart rate if desired.
If there are sheets of
clear plastic on the
metal contacts on
the handgrip pulse
sensor, remove the
plastic.
To measure
your heart rate, hold
the handgrip pulse
sensor with your
palms resting against
the metal contacts.
Avoid moving your hands
or gripping the contacts too tightly.
When your pulse is
detected, a heart-
shaped symbol will
flash in the left side of
the display each time
your heart beats, one
or two dashes will appear, and then your heart
rate will be shown. For the most accurate heart
rate reading, hold the contacts for at least 15 sec-
onds. Note: If you continue to hold the handgrip
pulse sensor, the display will show your heart
rate for up to 30 seconds.
5
4
3
2
1
Metal Contacts
Содержание 930 SPACE SAVER
Страница 22: ...22 NOTES...
Страница 23: ...23 NOTES...
