19
HOW TO USE THE STEREO SOUND SYSTEM
This product has been designed specifically to work
with iPod and has been certified by the developer to
meet Apple performance standards. To play music or
audio books through the console’s stereo sound sys-
tem while you exercise, you must connect your iPod
®
,
CD player, or personal audio player through the audio
jack or through the Integrated Universal Dock for
iPod
®
.
To use the audio jack, plug an audio cable (not includ-
ed) into the jack on the console and into a jack on
your iPod, MP3 player, or CD player
. Make sure that
the audio cable is fully plugged in.
To use the iFit
®
Universal iPod
®
Connector, plug one
end into the Integrated Universal Dock for iPod and
plug the other end into your iPod.
Make sure that the
iFit Universal iPod Connector is fully plugged in.
Next, press the play button on your iPod, MP3 player,
or CD player. Adjust the volume on your iPod, MP3
player, or CD player or press the Volume increase and
decrease buttons on the console.
Inspect and tighten all parts of the elliptical exerciser
regularly. Replace any worn parts immediately.
To clean the elliptical exerciser, use a damp cloth and
a small amount of mild soap.
IMPORTANT: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
HANDGRIP PULSE SENSOR TROUBLESHOOTING
If the console does not display your heart rate when
you hold the handgrip pulse sensor, or if the displayed
heart rate appears to be too high or too low, see step
5 on page 15.
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical exerciser rocks slightly on your floor
during use, see HOW TO LEVEL THE ELLIPTICAL
EXERCISER on page 12.
MAINTENANCE AND TROUBLESHOOTING
