background image

3

12. If an extension cord is needed, use only a 3-

conductor, 1 mm

2

(14-gauge) cord that is no

longer than 1.5 m (5 ft.).

13. Keep the power cord away from heated sur-

faces.

14. Never move the walking belt whilst the power

is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See 
BEFORE YOU BEGIN on page 5 if the tread-
mill is not working properly.) 

15. Never start the treadmill whilst you are stand-

ing on the walking belt. Always hold the
handrails whilst using the treadmill.

16. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid
sudden jumps in speed. 

17. The pulse sensors are not medical devices.

Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensors are intended
only as exercise aids in determining heart
rate trends in general.

18. Never leave the treadmill unattended whilst it

is running. Always remove the key, unplug
the power cord and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the loca-
tion of the on/off switch.)  

19. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADMILL on page 22.)
You must be able to safely lift 20 kg (45 lbs.)
in order to raise, lower, or move the treadmill. 

20. Do not change the incline of the treadmill by

placing objects under the treadmill.

21. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

22. When using iFIT.com CD’s and videos, an

electronic “chirping” sound will alert you
when the speed and/or incline of the treadmill
is about to change. Always listen for the
“chirp” and be prepared for speed and/or in-
cline changes. In some instances, the speed
and/or incline may change before the per-
sonal trainer describes the change.  

23. When using iFIT.com CD’s and videos, you

can manually override the speed and incline
settings at any time by pressing the speed
and incline buttons. However, when the next
“chirp” is heard, the speed and/or incline will
change to the next settings of the CD or video
program. 

24. Always remove iFIT.com CD’s and videos

from your CD player or VCR when you are not
using them.

25. Inspect and tighten all parts of the treadmill

regularly.

26. Never insert or drop any object into any 

opening.

27.

DANGER:

Always unplug the power

cord immediately after use, before cleaning
the treadmill, and before performing the main-
tenance and adjustment procedures de-
scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorised service representative. Servicing
other than the procedures in this manual
should be performed by an authorised service
representative only.

28. This treadmill is intended for in-home use

only. Do not use this treadmill in any commer-
cial, rental, or institutional setting.

WARNING:

Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

Содержание 635































Отзывы: