12
HOW TO USE THE MANUAL MODE
Note: If there is a sheet of clear plastic on the face
of the console, remove the plastic.
1. Begin pedaling or press any button on the con-
sole to turn on the console.
A moment after you begin pedaling or press a but-
ton, the display will light.
2. Select the manual mode.
Each time you turn
on the console, the
manual mode will
be selected. If you
have selected a
program, reselect
the manual mode
by pressing the Program button repeatedly until
the word MANUAL appears in the lower left corner
of the display.
3. Change the resistance of the pedals as
desired.
As you pedal,
change the resis-
tance of the pedals
by pressing the
increase and
decrease buttons
repeatedly. There
are sixteen resistance levels. Note: After you press
the buttons, it will take a moment for the pedals to
reach the selected resistance level.
4. Follow your progress with the display.
The upper left corner of the display
will show
the elapsed time. Note: When a program is select-
ed, the display will show the time remaining in the
program instead of the elapsed time.
The lower left corner of the display
will show
the distance you have pedaled, in miles or kilome-
ters.
The upper right corner of the display
will show
the approximate number of calories you have
burned. The upper right corner of the display will
also show your heart rate when you use the hand-
grip pulse sensor (see step 5 on page 13).
The lower right corner of the display
will show
your pedaling pace in miles or kilometers per hour.
The center of the display
will show the resis-
tance level of the pedals for a few seconds each
time the resistance level changes.
You can also view selected information at a larger
size. Press the Display button repeatedly to view
time and distance information, time and calorie
information, or time and pace information. Press
the Display button again to view all information.
The console has three backlight options. The “On”
option keeps the backlight on while the console is
on. To conserve the batteries, the “Auto” option
keeps the backlight on only while you are pedal-
ing. The “Off” option turns the backlight off. To
select a backlight option, first press and hold down
the Program button for several seconds. Next,
press the increase button to select the desired
backlight option. Then, press the Program button
to save your selection.
The console can show speed and distance in either
miles or kilometers. The letters MPH or KM/H will
appear in the display to show which unit of mea-
surement is selected. To change the unit of mea-
surement, first press and hold down the Program
button for several seconds. Next, press the
decrease button to select the desired unit of mea-
surement. Then, press the Program button to save
your selection.
