MEMORY
The TX-168PHB has a memory capacity of 37 names and numbers:
*
Each name can be as long as 15 characters.
*
Each number can be as long as 16 digits.
*
2 Memory locations are one-touch memories; use them for emergency
numbers.
*
The remaining 35 memory locations are accessible through the phonebook-
menu.
*
See chapter Pause on page 4 in case a dialpause is required.
*
It is possible to copy numbers, received by the TX-168PHB’s Caller-ID, into
the dialmemory. In case the system also sends the name, this name will be
copied too.
Programming M1 & M2:
1.
leave the handset on the telephone
2.
press M1 or M2; in case already a name and number was programmed, the
display shows this number else only the time and date is displayed
3.
press PROG, the upper-left segment will be selected (blinking stripe)
4.
key-in the name (see further on) and press YES
5.
key-in the telephone number and press YES
Programming phonebook memories:
1.
leave the handset on the telephone
2.
press MENU; the display indicates “PHONE BOOK”
3.
press PROG; the display gives “XX ENTRIES”; xx stands for the number of
memories which are already stored
4.
press YES, the upper-left segment will be selected (blinking stripe)
5.
key-in the name (see further on) and press YES
6.
key-in the telephone number and press YES
Programming of the name:
Use the dialbuttons to compose the name. Example: press 2x button 3 to get the
E, press 3x button 5 to get the L, etc.
-
use button to move the cursor to the right or to insert a space
-
use button to move the cursor to the left
-
use button CLEAR to erase the selected character
Dialing M1 or M2:
1.
lift the handset or switch to handsfree dialing and wait for the dialtone
2.
press M1 or M2
3.
the number will be dialed
7
Содержание TX-168PHB
Страница 1: ...USERS MANUAL TX 168PHB...
