HOW TO USE
Incoming calls:
The ringer can be switched-OFF by means of the RINGER-
ON/OFF switch on the base. An incoming call is still visible through
the lighting lamps.
Lift the handset and start the conversation.
Outgoing Calls:
Lift the handset and wait for the dialtone. Key in the desired telep-
hone number.
Last number redial:
Lift the handset and wait for the dialtone. Press the P/REDIAL but-
ton; the TX-129vm now automatically redials the last dialed num-
ber.
NOTE: If REDIAL is pressed AFTER one of the number buttons
has been pressed, then it acts as a pause.
Pause:
In case you are calling through a PABX, it is preferable to press
the P/REDIAL button direct after the prefix (mostly 0).
NOTE: If this key is pressed BEFORE one of the number buttons
has been pushed, then this key acts as a REDIAL key.
R/flash:
The TX-129vm has a R/FLASH button to transfer calls when con-
nected to a PABX or to gain access to special services from your
provider. Consult the manual of your PABX or consult your provi-
der. The FLASH time is 100 mS.
9
