background image

PREPARATION

OUTGOING MESSAGE (OGM):

This unit can record two kinds of messages: OGM1 is used when you want the
caller to hear the OGM and then leave a message, OGM2 is used when you only
want the caller to hear your OGM, but not leave a message. The maximum OGM
for each message is 30 seconds. The minimum time for an OGM is 4 seconds.
As you record, the display shows the time passed. If you have not recorded an
OGM1 and/or OGM2, the answering machine cannot be turned on.

Record:
1. Press and hold the 

OGM1

or 

OGM2

button for approximately 2 seconds until 

a long beep is heard. 

2. The display will count down the time left, so begin recording your outgoing 

message speaking in a normal tone of voice.

3. When finished recording, release the 

OGM1

or 

OGM2

button. A short beep 

will sound and the newly recorded outgoing message will then play once. 
Make sure the volumecontrol is at a desirable level.

Verify:
1. Press and release the 

OGM1

or 

OGM2

button and the selected Outgoing 

Message will play.

2. Press the 

STOP

button to stop playback before the end of the outgoing 

message is reached.

SETTING THE RINGS:

The amount of times the phone rings before picking up can be set to 2, 3, 4 or
Toll-Saver. Toll saver will answer the call on the fourth ring if no messages have
been recorded and it will answer on the second ring if new messages have been
recorded; this feature is useful when phoning in for your messages.
1. Press and hold the 

RING/

button for 2 seconds; the unit will beep and the 

present ring setting will blink.

2. The display will show one of the following:

2: Unit set to answer after 2 rings
3: Unit set to answer after 3 rings
4: Unit set to answer after 4 rings
t : Unit set to toll-saver mode.

3. Press the 

RING/

button and/or 

CODE/

button to change the ring setting. 

4. When the desired ring setting appears, press the 

STOP

button.

To check the current ring setting, press and release the 

RING/

button; the cur-

rent ring status will briefly appear in the display.

7

Содержание TAM-60X

















Отзывы: