Profoon PDX-8400, Руководство пользователя

Страница: 6 / 28

-6-
3 INSTALLATION
3.1 Base station:
1. Plug the small connector at the
phone cable into the back of the
base station (press the connector
until you hear a click).
2. Plug the phone connector into the
phone socket.
3. Plug the low voltage connector of
the adapter into the backside of
the phone, and plug the adapter
into a 230 Volt mains socket.
ONLY CONNECT THE INCLUDED ADAPTER. CONNECT-
ING OTHER ADAPTERS MAY RESULT IN DANGEROUS
SITUATIONS OR MAY CAUSE DAMAGE TO THE ELEC-
TRONICS OF THE PHONE.
3.2 Handset:
1. Open the battery
compartment of the
handset, by sliding the
battery cover down.
2. Insert the batter-
ies into the battery
compartment; at this,
pay attention to the
polarity (+ and -).
3. Slide the battery cover
back onto the handset
and place the handset
on the base station.
4. Leave the handset continuously during 15 hours on the base sta-
tion, to charge the batteries properly.
INSERT ONLY RECHARGEABLE NiMH (NICKEL METAL
HYDRIDE) BATTERIES. THE USE OF NOT RECHARGE-
ABLE BATTERIES MAY CAUSE DANGEROUS SITUA-
TIONS OR EXPLOSION HAZARD.
PAGE
PAGE