Profoon PDX-5300 Скачать руководство пользователя страница 12

Страница: 12 / 40

12 of 12

Inserting Pause for PBX System

User can press and hold

to insert a Pause of 3 seconds. A “

will be shown on the display.

Note: If there is a in the predial, phonebook, redial or service

number, the handset will pause for the preprogrammed duration
before dialing out the next digit.

Receiving External Calls

When receiving an external call, all handsets including the base unit will
ring, provided that the ringers are on. The

icon on the display will

blink. The LED on the handset and the In Use LED on the base unit will
also blink.

When the handset is on the base unit, lift the handset:

•

to answer the call when the AUTO ANS feature is turned on.

•

press

to connect the call if the AUTO ANS feature is turned

off. (Refer to section “Auto Answering” for details)

When the handset is not on the base unit:

•

Press

to connect the call.

Recall

This key

is also used for a number of services available from the

telephone network, and for use when connected to certain telephone
switches. Details on when to use this button will be explained by the
network service provider. (Refer to Flash Timing Section)

Adjusting the Handset Ringing Volume

•

Press

Use

to scroll through the menu until the display

reads SOUNDS.

•

Press

. Use

to scroll through the menu until the display

reads HS RINGER.

•

Press

. The display reads VOLUME.

•

Press

•

Use

to select from

and VOL

OFF.

represents the minimum volume level whereas

represents the maximum volume level.

•

Press

to confirm the selection and exit to VOLUME.

•

To turn off the ringer volume, press

on VOL OFF. The

icon

on the display will be turned on.

•

User can also press and hold

during phone ringing or

standby to turn off the ringer. The

icon on the display will be

turned on. To turn on the ringer, user can press and hold

during phone ringing or standby. The

icon on the display will be

turned off.

Adjusting the Receiver Volume

During a call, user can adjust the receiver volume by pressing

There are 3 levels of receiver volume to choose from:

•

Press

, the current volume level is displayed.

•

Press

to increase the volume.

Содержание PDX-5300









































Результаты поиска

Содержание PDX-5300

Отзывы:

Profoon PDX-5300, Руководство пользователя, Страница: 12 / 40

Результаты поиска

Содержание PDX-5300

Отзывы: