Proflex EB1 Скачать руководство пользователя

Страница: 5 / 9

EB1 Exercise Bike

E&OE

Assembly

Take all parts out of the carton and place them on
a firm, flat surface. Remove all packing materials.

See

Fig. 1

. Attach the front foot (

) and rear foot

(

) to the frame (

) using 4 coach screws (

curved washers (

) and cap nuts (

). Ensure the

square holes in the feet are facing the ground.
Ensure the washers follow the shape of the tube
when installed. Tighten (rotate right) the nuts
using the supplied spanner.

See

Fig. 2

. Remove the nuts and washers (

and

) from under the saddle (

). Place the saddle

on top of the saddle post (

) and secure with the

nuts and washers (

and

). Tighten (rotate

right) the nuts with the supplied spanner.

Insert the saddle post (

) into the frame (

), with the height

adjustment holes facing rearward. Secure it at the desired
height with the saddle post locking screw (

)

– the pin on

the end of the screw must enter a hole in the post to be
able to secure properly. Firmly tighten (rotate right) the
screw by hand.

See

Fig. 3

. Bring the handlebar post (

) near to its location

on the bike frame (

). Hook the tension cable in the

handlebar post to the bracket on the end of the tension
cable in the frame (

). Note that you may need to loosen

the cable by rotating the effort adjuster left in order to
connect the cables. Then, connect the wiring in the
handlebar post to the wiring in the frame (

Insert the handlebar post into the frame, being careful
not to pinch the electrical cables. Secure the handlebar
post using 4 screws (

) and curved washers (

Ensure the washers follow the shape of the tube when
installed. Tighten (rotate right) the screws using the
supplied Allen key.

See

Fig. 4

. Plug the console (

) electrical cable to the

handlebar post electrical cable. If the cable in the handlebar
post is not visible, pull the console mounting cap (

) off the

post and gently pull the cable out. Ensure that the cable
passes through the hole on top of the console mounting cap
and push the cap back onto the top of the post. Excess cable
can be stored in the handlebar post. Slide the console onto the
mounting cap. Install the supplied battery into the console.

Attach the handlebar (

) to the top of the handlebar post

using 2 screws (

), spring washers (

) and washers (

). Tighten (rotate right) the screws using the

supplied Allen key. Gradually tighten both screws in stages and ensure that the handlebar clamp
remains parallel to its mounting.

IMPORTANT

–

Failure to correctly follow the following step may void your warranty

. The left

pedal

, marked “L” on the end of the pedal bolt, must be fitted to the left-side crank arm and rotated left

(anti-clockwise)

to install. The right pedal, marked “R” on the end of the pedal bolt, must be fitted to the

right-side crank arm and rotated right (clockwise) to install.

Attach the left-side pedal (

) and right-side pedal (

) to the respective crank arms. Tighten the pedal

bolts using the supplied spanner

Once assembled, the machine ready for use.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX