3
GB
Notes before and during thermal binding:
•
Place the machine on a steady and even place before using.
• Ready for binding will be signalized by
fi
rst buzz and by green working light.
• This signal will buzz every minute in order to show, that you can take out the docu-
ment and put it on to the cooling rack.
• If you put the papers into the machine when the green working light is off, the machine
will be buzzing and stop heating, until the documents have been taken out.
• Before using, please choose the proper thermal cover according to the thickness of
the documents referring to following chart:
NOTE!
• The document should be in good order to avoid bad binding result.
• Make sure the thermal cover cling enough to heating board.
• If you are binding a thick document, you may bind the document several times continu-
ously. The machine can be used for binding max. 3 times.
• Average binding time for different cover sizes refer to chart:
Size of thermo cover (mm):
Time for binding in minutes:
1 to 6
1
8 to12
2
15 to 24
3
• Please turn off the machine on time after
fi
nishing binding. And also the machine will
be powered off automatically after 5 minutes stand by.
Sizes of thermal
cover (mm):
Binding capacity
(80 gr/m²):
Sizes of thermal
cover (mm):
Binding capacity
(80 gr/m²):
1
1 – 8
12
81 – 100
2
9 – 16
15
101 – 130
3
17 – 23
18
131 – 160
4
24 – 33
20
161 – 180
6
34 – 50
22
181 – 200
8
51 – 70
24
201 – 220
10
71 – 80
Bindstream Thermo_T220_06.indd 3
Bindstream Thermo_T220_06.indd 3
22.10.2008 22:54:27
22.10.2008 22:54:27