PROFILO PSI1165G, Руководство пользователя

Страница: 9 / 16

9
PSI1165G-001_v01
Hints for ironing
1 Sort out the articles to be ironed according to the type
of fabric. This will minimize the frequency of temperature
adjustment for different garments.
2
Test ironing a small area on the backside or inside the
garment if you are unsure about the type of fabric. Start with
a low temperature and increase gradually.
3 Wait for about three minutes before ironing heat sensitive
fabrics. Temperature adjustment needs certain time to reach
the required level no matter it is higher or lower.
4 Delicate fabrics such as silk, wool, velour, etc. are best
ironed with an ironing cloth to prevent shine marks.
5 You may need a few times of press to activate the spray,
burst and vertically burst function.
6 Read the garment labels and follow the manufacturer’s
ironing instructions which are often shown by symbols
similar to the following:
Temperature settings
●
Acetate
● Elastics
●
Polyamide
● Polypropylene
●
Cupro
●
Polyester
● Proteins
●
Silk
●
Triacetate
●
Viscose
● Wool
●
Cotton
●
Linen
Technical data
The iron technical parameters are included at the name plate.
The iron is I class appliance, equipped with supplying cord
and plug with grounding.
PROFiLO iron meets the requirements of effective standards.
This device complies with Commission Regulation (EC)
no. 1275/2008 on eco-design requirements.
The appliance meets the requirements of the following
directives:
–
Electrical equipment designed for use within specific
voltage limits (LVD) – 2006/95/EC.
–
Electro-Magnetic Compatibility (EMC) – 2004/108/EC.
The product is marked with CE symbol on the name plate.
Features
1
Steam Control
2 Steam Burst Button
3 Spray Button
4 Self-Clean Button
5
Temperature Indicator
6 Temperature Dial
A
●
Never direct the steam to human or
pets.
●
The iron must not be left unattended
while it is connected to the supply
mains.
CAUTION!
Not observance can result in
damage to possessions
●
Remove any protective films or stickers from the sole
plate and the cabinet.
●
Unwind and straighten the power cord before usage.
●
Fill the water using included vessel for water.
●
Keep the power cord away from the soleplate.
●
Make sure that the voltage on the rating plate
corresponds to that of your power grid.
●
Always connect the iron to a suitable mains supply
outletm (AC only), with grounding, which voltage
complies with the voltage indicated on the appliance
nameplate.
●
Do not use an extension power cord set without
grounding!
●
Do not add perfume, vinegar or other chemical liquids
into the water tank; they can damage the appliance
seriously.
●
Do not immerse the appliance in water or any other
liquid.
●
Do not wrap the power cord around the unit for storage
until it has cooled down completely.
●
Do not attempt to open the cabinet or dismantle any
parts from the appliance.
●
The appliance is not intended to be operated by means
of an external timer or separate remote-control system.
●
If you do not use the iron, even for short time, switch it
off, turning Temperature Dial in anti-clockwise direction
to „MIN” .
●
If you are not going to use the iron even for a short
period of time, turn off the steam function by setting the
steam control to position.
●
Use “SELF CLEANING” function at least once a month.
SUGGESTION
Information on the product and
suggestions for its use
●
The iron is intended for domestic usage only and you
can use it solely according to herewith manual.