8
PEI0800B-001_v01
●
In order to provide additional protection, it is
recommended to install the residual current device
(RCD) with nominal residual power not exceeding
30 mA. You should contact the professional electrician
in this concern.
●
While cooking some fatty dishes, it can be necessary
to empty the grease drip tray.
●
Apply the recommended temperature setting. You can
adjust the temperature during grilling if necessary.
●
Keep the proper space over and around the grill
to provide an easy air flow. Do not let the appliance
touch curtains, wall-paper, cloths, towels or other
combustible materials during operation. Do not use
under cupboards or curtains. Be careful in case of
surface sensitive for heat – thermo isolating pad is
recommended.
●
Do not place the appliance on or near open fire, hot
burner or heated oven.
●
It is not allowed to use charcoal or similar combustive
materials.
●
Before usage make sure that grease drip tray and grill
are properly assembled on the base.
●
Do not use your grill without grease drip tray
assembled.
●
Do not move the grill pulling by supplying cord.
●
Do not let the supplying cord touch hot surfaces.
●
Use not sharp, the best wooden utensils to turn the
food, in order to avoid scratching non-sticking surface.
●
In case it is necessary to use sharp utensils and
knives, i.e. to cut something when grilling, at first
remove the product from the grill.
●
The appliance is not intended to be operated by means
of an external timer or separate remote-control system.
●
In order to avoid any risk posed by an unintentional
return to the initial state of thermal protection, the
equipment is not to be supplied via an external switch,
such as a programmable timer switch, or connected
to the circuit regularly enclosed and disabled by the
power supply.
●
It s not allowed to cover the heating plate with
aluminium foil, lid, etc, which can result with heat
accumulation and damage plastic parts and the layer.
●
Sometimes it is necessary to move the fat manually to
fat drainage, in order to do it, use always wooden, not
pointed utensils.
●
Do not use aggressive detergents like cream, milk,
paste etc. to clean the casing. They can remove
graphic symbols such as: scales, marking, caution
signs, etc.
●
Do not wash the parts in dishwasher.
●
Dry thoroughly after cleaning. Make sure the appliance
is completely dry before thermostat assembling.
SUGGESTION
Information on the product and
suggestions for its use
●
The appliance is intended for household use, indoors
only.
●
The heating surface is coated with special non-stick
layer; therefore do not use sharp utensils for turning
grilled products. Use only soft wooden spatula.
Appliance elements
1
Heating plate – grids
2
Grease drip tray
3
Fat drainage
4
Thermostat with supplying cord
5
Pilot lamp
6
Heat-resistant handles
Technical parameters
The appliance is built in I class isolation, grounding
necessary.
Technical parameters are included at the name plate.
Grill meets the requirements of appropriate standards.
This device complies with Commission Regulation (EC)
no. 1275/2008 on eco-design requirements.
The appliance meets the requirements of the following
directives:
–
Electrical equipment designed for use within specific
voltage limits (LVD) – 2006/95/EC.
–
Electro- Magnetic Compatibility (EMC) – 2004/108/EC.
The product is marked with CE symbol on the name plate.
Assembling
Remove all stickers before first usage and
clean the appliance thoroughly (see: „Cleaning
and maintenance”).
●
Make sure hat the heating plate socket and thermostat
plug are dry.
●
Check if the fat drainage
(3)
is permeable, clean it and
remove dirt if necessary.
1
Install the grease drip tray
(2)
at the grill
(1)
.
2
Apply a small amount of oil on the heating plate
(1)
before usage and distribute it with paper towel.
3
Insert the thermostat with supplying cord
(4)
in the
appliance socket. Make sure that the thermostat knob is in
“OFF” position.
4
Connect the supplying cord to the mains supply outlet.
A
B
Содержание PEI0800B
Страница 10: ...Notes...
