background image

Adopt  GSM  850 900/1800/1900  bands,  can  be  used  all  over  the 

world.

Can  per-set  5  phone  numbers:  when  there  is  an  alarm,  it  will  call 

these numbers in order. Press DISARM button on the main panel, it 

will stop alarming. 

Can  per-set  5  SMS  numbers:  when  there  is  an  alarm,  it  will  send 

SMS to these numbers.

Maximum  30  wireless  sensors  including  wireless  panic  button  or 

remote controllers, etc.

2 wired ports to connect wired sensors.

The  SMS  content  of  the  first  5  wireless  sensors  can  be  edited  by 

users.

Support  remote  listen  in  and  two-way  communication  (connect  an 

external speaker). 

SMS alert for power failure or recovery.

Built-in backup rechargeable battery to keep working after power off.

/

II. Preparation Before Use

I. Features

1.Insert SIM card in alarm system

Before inserting SIM card, please make sure: 
---Use a regular mobile phone to set PIN code request to off
---Delete all stored numbers
---Make sure there's enough balance in the card to work normally
Open the outside case of the alarm system and put the SIM card into the 
card slot (see picture).

Features

Содержание yl-007eg Mobile Call
















Отзывы: