13
BEEP - The beep sound when you press a button on the unit can be turned on or
off. Press the SEL button for more than 2 seconds to display the DSP
function. Press the SEL button again momentarily to display BEEP ON/OFF.
Then use
to turn on/off the beep sound.
SET VOL - A certain volume level can be set to come on when the unit is turned
on or can be set to come on at the same last level before the unit was
turned off. Press the SEL button for more than 2 seconds to display
the DSP function. Press the SEL button four times momentarily to
display VOL LAST/ADJ. Use the VOL knob 5 to choose between VOL
LAST and VOL ADJ. To set the volume to a certain level, press the SEL
button momentarily when VOL ADJ is displayed. Then use the VOL knob
5 to adjust to certain volume level when A-VOL is displayed.
12
CD TOP/PAUSE
In CD play mode, press the TOP 12 button to pause CD play. Press again to
resume normal play.
In CD play mode, press the TOP 12 button for more than 2 seconds to go back
to the top of the disc and play the first track.
13
CD SCAN
In CD play mode, press the INT 13 button to turn on intro playing first 10 seconds
of each track. When wish to listen to the whole track during intro mode,
press the button again to turn off intro.
14
REPEAT PLAY
In CD play mode, press the RPT 14 button to continuously playing the current
track. Press it again to cancel the repeat feature.
the VOL knob 5
SEEK- The unit is equipped with two types of seeks, SEEK 1 and SEEK 2, for radio
stations. Press the SEL button for more than 2 seconds to display the DSP
function. Press the SEL button twice momentarily to display SEEK 1 or 2.
Then use the VOL knob 5 to switch between SEEK 1 and SEEK 2. (This
adjustment is only available during radio operation)
SEEK 1 mode: Pressing 8 or 9 button for more than 2 seconds will seek
up or down to the next strong station during radio operation.
SEEK 2 mode: Pressing 8 or 9 button continuously will speedily change
station up or down until the button is released.
12 H / 24 H- The unit is equipped with two types of clock formats, 12 Hour and 24
Hour. Press the SEL button for more than 2 seconds to display the DSP
function. Press the SEL button three times momentarily to display 12H
or 24 H. Then use the VOL knob 5 to choose between 12 H and 24 H.
I
I
I
I
