Profile CD7200 Скачать руководство пользователя страница 14

13

 

      

      

DSP - The unit is equipped with 4 preset equalization modes. Press the SEL button 

                for more than 1 second to display DSP OFF. Then use V.UP   5  and V.DN   6  
                buttons to choose one of 4 following preset EQ s  in the following order. In 
                DSP OFF mode, the EQ is controlled by Bass and Treble settings.

                             DSP OFF          FLAT          CLASSIC          ROCK          POP 
      
      
      BEEP - The beep sound when you press a button on the unit can be turned on or 
                  off. Press the SEL button for more than 1 second to display the DSP 
                  function. Press the SEL button again momentarily to display BEEP ON/OFF. 
                  Then use V.UP   5   and V.DN   6  buttons to turn on/off the beep sound.

      SET VOL - A certain Volume Level can be set to come on when the unit is turned 
                         on or can be set to come on at the same last level before the unit was 
                         turned off. Press the SEL button for more than 1 second to display 
                         the DSP function. Press the SEL button twice momentarily to display 
                         VOL LAST/ADJ. Use V.UP   5   and V.DN   6  button to choose between 
                         VOL LAST and VOL ADJ. To set the volume to a certain level, press the 
                         SEL button momentarily when VOL ADJ is displayed. Then use V.UP   5  
                         and V.DN   6  buttons to adjust to certain volume level when A-VOL is 
                         displayed.

13  

CD TOP/PAUSE

      In CD play mode, press the TOP       13 button to pause CD play. Press again to 
      resume normal play.

      In CD play mode, press the TOP       13 button for more than 1 second to go back
      to the top of the disc and play the first track.

14  

CD SCAN

      In CD play mode, press the INT  14  button to turn on intro playing first 10
      seconds of each track. When wish to listen to the whole track during intro mode, 
      press the button again to turn off intro.

15  

REPEAT  PLAY

      In CD play mode, press the RPT  15  button to continuously playing the current 
      track. Press it again to cancel the repeat feature.

Press the SEL button for more than 1 second to display additional set of functions 

      for adjustments, such as DSP, Beep On/Off, and Volume Last/Adjust.
     
      

,

Содержание CD7200





















Отзывы: