8
ISO/DIN MOUNTING
If you own a Japanese vehicle, you can use the mounting screw holes on the side of the CD
player to attach to the factory mounting brackets.
!
Detach the removable face of the CD6500 by depressing the release button
!
Remove the outside trim ring by gently pulling at both outer edges (See page 9).
!
Remove the side retaining plates by unscrewing the two phillips screws.
!
Remove the brackets from the factory radio, paying close attention to their position.
!
Attach the brackets to the CD6500 in the same position as the factory radio.
!
After attaching the wiring harness to the factory wiring loom (See Electrical and
Signal Connections) and plugging the antenna lead , place the CD player in the
dash aligning the mounting hole of the CD player with the factory mounting
brackets. Secure the radio to the brackets using factory mounting screws.
FACTORY SIDE RETAINING PLATES,
STYLE AND SHAPE WILL VARY
FOR EACH VEHICLE
Once the CD player is secured,
insert the face plate with the
right side of the face plate
angled in first then gently push
the left side of face plate until it
snaps completely in place.
CD6500
