4
Using the Included Wall-Mount Bracket
The included wall-mount bracket makes it easy to attach the LSB3 to a wall built with standard 16-inch-on-
center studs. To mount the bracket, use a stud finder to locate the two wall studs closest to the horizontal
center of the video screen. Use a pencil or market to mark a point between these two studs and 6 inches
below the bottom edge of the TV chassis or projection screen.
Make sure there are no electrical wires, conduits, pipes or vents behind the spot you’ve marked. Use a ¼"
bit to drill a hole in the wall. Drill only as deep as needed to penetrate the wall. Insert the included wall
anchor and tap it in very gently with a hammer. Align the center mounting hole on the included mount
with the wall anchor, and secure it with the screw provided.
Use a spirit (bubble) level to assure that the mount is perfectly leveled, then use the four included long
screws to attach the mount to the wall. (Diagram 2) Make sure the screws go into the wooden studs
behind the wallboard. (Diagram 3) Attach the speaker wires to the soundbar, then lift the soundbar onto
the wall mount so the mount mates with the bracket mounted on the back of the speaker. (Diagram 4)
Press down lightly on the soundbar to make sure it’s firmly seated on the bracket. (Diagram 5) Now slide
the soundbar horizontally so it is centered with the video screen. (Diagram 6)
Diagram 2
Use Included Screws to Attach Bracket to Wall
Diagram 3
Be Sure Screws Go Into The Wooden Studs Behind Wallboard
