ProfiCare PC-FT 3094, Инструкция по эксплуатации

Страница: 70 / 128

70
PC-FT3094 IM new 20.04.21
Data Memory
• To review the logged data points, press the “ Memory / Mode ” button for one
second while the device is switched on until the “ ” symbol shown on the display.
Use the or button to scroll through the stored measurements and memory
locations.
To delete all memory data, simply remove the batteries while the device is
switched on.
Notice:
If the “Body temp” mode is selected with the “ B / O “ button, the body temperature
memories are displayed;
If the “Object temp” mode is selected with the “
B / O “ button, the object tempera-
ture memories are displayed.
Battery Replacement
When the low battery symbol appears in the display, replace the meter’s battery.
The battery compartment is located on the bottom of the handle. Press down on the
battery compartment lock and at the same time slide the battery compartment down-
ZDUGV5HSODFHWKH$$EDWWHULHVDQGFORVHWKHEDWWHU\FRPSDUWPHQWFRYHU<RXDV
the end user, are legally bound (Battery ordinance) to return all used batteries and
DFFXPXODWRUVGLVSRVDOLQWKHKRXVHKROGJDUEDJHLVSURKLELWHG<RXFDQKDQGRYHU
\RXUXVHGEDWWHULHVDFFXPXODWRUVDWFROOHFWLRQSRLQWVLQ\RXUFRPPXQLW\RUZKHUHYHU
EDWWHULHVDFFXPXODWRUVDUHVROG
Disposal: Follow the valid legal stipulations in respect of the disposal of the
device at the end of its life cycle.
IR Measurement Notes
• Before measuring, be sure to clean surfaces that are covered with frost, oil, grime,
etc.
• ,IDQREMHFW¶VVXUIDFHLVKLJKO\UHÀHFWLYHDSSO\PDVNLQJWDSHRUÀDWEODFNSDLQW
to the surface before measuring. Allow time for the paint or tape to adjust to the
temperature of the surface it is covering.
• Measurements through transparent surfaces such as glass may not be accurate.
• Steam, dust, smoke, etc. can obscure measurements.