#45831 - MANUAL
Read these instructions completely before using this product and retain this owner´s
manual for future reference.
SPECIFICATIONS
Input:
3.6V
Battery:
1.5Ah Li-Ion
No load speed:
5.000-18.000 rpm
Speed settings:
6
Collet size:
Ø1,6, 2,4, 3,2 mm
Charge Time:
3-5 Hours
Speeds:
1-6
Weight:
0,2 kg
STANDARD EQUIPMENT
Cordless 3.6V Rotary Tool
16 x Sanding Bands & 30 Sanding Discs
20 Cut-Off Wheels, 2 x HSS Cutters,
5 x Drill Bits & 10 x Diamond
Engravers
2 x Steel Brushes, 2 x Nylon Brushes, Rubber
Polishing Point, Felt Tip with Shank, 5 x Felt
Wheels, Felt Tip & Cloth Wheel
10 x Grinding Stones, Whet Stone,
2 x Drum Mandrels, 2 x Screw
Mandrels & Cone Mandrel
USB Cable, 5 x Collets, Spanner, LED Collar & Carry
Case
KNOW YOUR PRODUCT
CORDLESS 3.6 ROTARY TOOL
1. Charging Input
2. Battery Status Indicator Light
3. On/Off Button
4. Spindle Lock Button
5. Shaft Collar
6. Collet Nut
7. Variable Speed Controls
SETUP & PREPARATION
1. BATTERY & CHARGER
Battery Charge Indicator
The rotary tool is equipped with a battery status indicator to show the battery charge state. Press
the on/off button and see which LED lights up to gauge the status.
Full Charge
Mid Charge
Low Charge; requires charging soon.
Battery requires immediate charging.
WARNING!
THE POWER SUPPLY FOR THIS
CHARGER IS RECOMMENDED FOR USE WITH A
RESIDUAL CURRENT DEVICE (RATED AT 30mA OR
LESS).
