Profi Cook PC-RG 1144, Инструкция по эксплуатации

Страница: 32 / 58

32
PC-RG1144_IM 09.06.17
Intended Use
This appliance serves for heating, grilling and browning of
food.
It is intended for the use in private households and similar
applications. The appliance is only to be used as described
in the user manual. Do not use the appliance for any other
purpose.
Any other use is not intended and can result in damages or
personal injuries.
The manufacturer assumes no liability for damages caused
by improper use.
Scope of Delivery
1 Grilling appliance
1 Hot stone
1 Turnable cast plate
10 Small pans
10 Wooden spatulas
Overview of the Components
1 Grill platter
2 Hot stone
3 Power indicator lamp
4 Temperature control
5 Tray for the pans
6 Heating coil
7 Small pans
8 Frame
9 Handle
Unpacking the Appliance
1. Remove the appliance from its packaging.
2. Remove all packaging materials such as films, filler
material, cable clips and carton.
3. Check the contents for completeness.
4. In case of incomplete delivery or damage, do not operate
the appliance. Return it to your dealer immediately.
NOTE:
Production residue or dust may have collected on the appli-
ance. We recommend cleaning the appliance according to
chapter “Cleaning” .
Notes on Use
CAUTION: Avoid damage to the non-stick coated
grill surfaces!
• Only use wooden or Teflon spatula.
• Do not use pointed objects (e. g. knife, fork) on the grill
surface.
• Do not use plastic utensils. They can melt.
• The non-stick coated grill surfaces enable dishes to be
prepared without the use of fat.
• If you want to use oil ensure that it is highly heatable,
such as sunflower oil. Do not use olive oil or butter, since
they start smoking already at low temperatures.
Assembly
• Place the hot stone and the grill plate into the frame of the
appliance.
• Place the small pans underneath.
Electrical Connection
1. Please ensure that the temperature control is set to
position “ MIN ”.
2. Before you plug the power plug into the power outlet,
ensure that the mains voltage corresponds with that of
the appliance. You can find information about this on the
rating plate.
3. Only connect the appliance to a properly installed earthed
socket.
CAUTION: Overload!
Do not use any multiple sockets, as this device is too
powerful.
Switching On / Off
The temperature control is used to switch the appliance
on and off. The light beside the controller shows you the
operation. ( MIN = Off)
Temperature Control
Adjust the temperature control depending on the intended
purpose:
• The
MAX setting for grilling or roasting;
• a small or medium setting for keeping warm or cooking.
Before Initial Use
1. Slightly grease the small pans and the grill plate.
2. Put all the parts into the appliance.
3. Operate the appliance without food for about 20 minutes
to remove the protective layers. To do so, set the temper-
ature control to the position MAX .
NOTE:
This process normally produces a small amount of
smoke. Ensure adequate ventilation.
4. Set the temperature control to position “ MIN ”. Disconnect
the mains plug from the wall socket.
5. Let the appliance cool down completely.
6. Clean all the parts that will come into contact with food
again.
Your appliance is now ready to use.