background image

1/4" TRIM ROUTER

SAFETY INSTRUCTIONS

• 

Keep work area clean and well lit.

 Cluttered or dark areas invite accidents.

• 

Do not operate power tools in explosive atmospheres, such as in the presence

  of flammable liquids, gases or dust.

 Power tools create sparks which may ignite

  the dust or fumes.
• 

Keep children and bystanders away while operating a power tool.

  Distractions can cause you to lose control.
• 

Stay alert, watch what you are doing and use common sense when operating a

  power tool. Do not use a power tool while you are tired or under the influence of

  drugs, alcohol or medication.

 A moment of inattention while operating power tools

  may result in serious personal injury.
• 

Use personal protective equipment.  Always wear eye protection.

 Safety equipment

  such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
  appropriate conditions will reduce personal injuries.
• 

Prevent unintentional starting. Ensure the switch is in the off-position before

  connecting to power source and/or battery pack, picking up or carrying the tool.

  Carrying power tools with your finger on the switch or energizing power tools that have
  the switch on invites accidents.
• 

Do not overreach. Keep proper footing and balance at all times. 

This enables better

  control of the power tool in unexpected situations.
• 

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and

  gloves away from moving parts.

 Loose clothes, jewelry or long hair can be caught in

  moving parts.
• 

Only use safety equipment that has been approved by an appropriate standards

  

agency.

 Unapproved safety equipment may not provide adequate protection. Eye

  protection must be ANSI-approved and breathing protection must be NIOSH-approved
  for the specific hazards in the work area.

ELECTRICAL SAFETY

• 

Power tool plugs must match the outlet. Never modify the plug in any way. Do not

  use any adapter plugs with grounded power tools.

 Unmodified plugs and matching

  outlets will reduce risk of electric shock.
• 

Avoid body contact with grounded surfaces such as pipes, radiators, ranges

  and refrigerators.

 There is an increased risk of electric shock if your body is grounded.

• 

Do not expose power tools to rain or wet conditions.

 Water entering a power tool

  will increase the risk of electric shock.
• 

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the

  power tool. Keep cord away from heat, oil, sharp edges or moving parts.

 Damaged

  or entangled cords increase the risk of electric shock.

  

  

For Customer Service, Call 

1-800-348-5004

or e-mail 

[email protected]

46662       01/2018

*Actual product may vary slightly

Please carefully read and save these instructions before attempting to assemble, maintain, install, or operate this product.

Observe all safety information to protect yourself and others. Failure to observe the instructions may result in property

damage and/or personal injury. Please keep instructions for future reference.

For warranty purchases, please keep your dated proof of purchase. File or attach to the manual for safe keeping.

[email protected]

2

1-800-348-5004

This product can expose you to chemicals including

LEAD/CADMIUM/DEHP, which is known to the State

of California to cause cancer and birth defects or

other reproductive harm. For more information go

to www.P65Warnings.ca.gov.

WARNING

Отзывы: