5
Controls and components:
Pistol screwdriver:
1. Tensioning head without key
2. LED light
3. Conversion button
4. Charging port
5. Forward/reverse switch
Charging the battery:
1. Place the unit on a clean and dry
surface within 1 metre of a 110-
240V (AC) / 50HZ / 60HZ wall
socket.
2. Plug the AC adaptor into the
charging port on the side of the device.
3. Plug the AC adaptor into the wall socket.
4. Allow 2 to 3 hours for the battery to fully charge.
5. After charging, disconnect the device and the device should be ready for use.
6. The LED battery level indicator should tell you how much charge the battery
has left.
Operation:
1. Insert the bit into the chuck until it clicks into place.
2. Grasp the tool firmly with both hands, align the bit with the screw and press it
firmly into the screw.
3. Start the tool by pressing the forward/reverse trigger switch. (*Press the top of
the switch to turn the screw forward, press the bottom of the switch to turn the
screw backwards).
Tips for troubleshooting:
*Press the LED battery level indicator and check that the unit is fully charged.
Maintenance:
*Use only mild soap and a damp cloth to clean the appliance.
*Do not allow liquids to enter the tool.
*Do not immerse any part of the tool in liquids.
