PROFACE PS-4700 Series, Руководство пользователя

Страница: 83 / 164

PS-4700/4800 Series (Atom N270 / Core 2 Duo P8400 Pre-installed Model) User Manual
83
Installing the Industrial Personal Computer Unit
The installation gasket and installation fasteners are required when installing the
Industrial Personal Computer.
Follow the steps shown below when installing the Industrial Personal Computer:
Step Action
1 Check that the gasket is correctly attached to the Industrial Personal Computer.
NOTE: When checking the gasket, avoid contact with the sharp edges of the
Industrial Personal Computer frame, and insert it completely into its groove.
2 Install the Industrial Personal Computer in the panel opening (see page 79) .
3 Insert each installation fastener securely into the slots at the top, bottom, left and
right side of the Industrial Personal Computer:
The number of slots is screen size dependent:

14 slots for the 15" Industrial Personal Computer.

18 slots for the 19" Industrial Personal Computer.
4 Insert each fastener in its corresponding slot as shown in the figure below:
5 Pull the fastener back until it is flush with the rear of the attachment hole: