background image

8

Store in a safe place. Open fuel cap slowly to release
any pressure which may have formed in fuel tank. To
prevent a fire hazard, move at least 10 feet (3 meters)
from fueling area before starting.

Turn unit off before setting it down.

Always hold unit firmly with both hands, the thumb and
fingers encircling the handles.

Keep all screws and fasteners tight. Never operate your
equipment when it is improperly adjusted or not
completely and securely assembled.

Keep handles dry, clean and free of fuel mixture.

Keep the cutting head as close to ground as practical.
Avoid hitting small objects with the line spool. When
cutting on a slope, stand below stringhead. NEVER cut
or trim on a hill or slope, etc. if there is the slightest
chance of slipping, sliding or losing firm footing.

Check the area you will be trimming for debris that may
be struck or thrown during operation.

Keep all parts of your body and clothing away from the
cutting head when starting or running engine. Before
starting the engine, make sure the cutting head will not
come in contact with any obstructions.

Stop the engine before examining cutting line.

Store equipment away from possible flammable
materials, such as gas-powered water heaters, clothes
dryers, or oil-fired furnaces, portable heaters, etc.

Always keep the safety guard, the cutting head, and
engine free of debris build-up.

Operation of equipment should always be restricted to
mature and properly instructed individuals.

If unfamiliar with trimming techniques, practice the
procedures with engine in “OFF” position.

Always clear work area of debris such as cans, bottles,
rocks, etc. Striking objects can cause serious injury to
the operator or bystanders and also damage
equipment. If an object is hit accidentally, turn the
engine off immediately and examine the equipment.
Never operate unit with damaged or defective
equipment.

Always trim or cut at high engine speeds. Do not run
engine slowly at start or during trimming operations.

Do not use equipment for purposes other than trimming
or mowing weeds.

Never raise the cutting head above knee height during
operation.

Do not operate unit with other people or animals in the
immediate vicinity. Allow a minimum of 50 feet (15
meters) between operator and other people and
animals when trimming or mowing. Allow a distance of
100 feet (30 meters) between operator and other
people and animals when operating the petrol grass
trimmer.

If operating on a slope, stand below the cutting
attachment. Do not operate on a slope or hilly incline if
there is the slightest chance of slipping or losing your
footing.

ADDITIONAL INSTRUCTIONS

DO NOT USE ANY OTHER FUEL other than that
recommended in your manual. Always follow
instructions in the Fuel and Oil section of this manual.
Never use petrol unless it is properly mixed with 2-
stroke engine oil. Permanent damage to engine will
result, voiding manufacturer’s warranty.

DO NOT SMOKE while refueling or operating equipment.

DO NOT OPERATE UNIT WITHOUT AN EXHAUST and
properly installed exhaust shield.

DO NOT TOUCH or let your hands or body come in
contact with the exhaust. Hold unit with thumbs and
fingers encircling the handles.

DO NOT OPERATE UNIT IN AWKWARD POSITIONS, off
balance, outstretched arms, or one-handed. Always use
two hands when operating unit with thumbs and fingers
encircling the handles.

DO NOT RAISE THE LINE SPOOL above ground level while
unit is operating. Injury to operator could result.

DO NOT USE UNIT FOR ANY PURPOSES OTHER than
trimming lawn or garden areas.

DO NOT OPERATE UNIT FOR PROLONGED PERIODS. Rest
periodically.

DO NOT OPERATE UNIT WHILE UNDER THE INFLUENCE
OF ALCOHOL OR DRUGS.

DO NOT OPERATE UNIT UNLESS SAFETY GUARD IS
INSTALLED AND IN GOOD CONDITION.

DO NOT ADD, REMOVE OR ALTER ANY COMPONENTS OF
THIS PRODUCT. Doing so could cause personal injury
and/or damage the unit voiding the warranty.

DO NOT operate your unit near or around flammable
liquids or gases whether in or out of doors. An explosion
and/or fire may result.

DO NOT USE ANY OTHER CUTTING TOOLS. For your own
safety only use the accessories and additional
equipment specified in the operating manual. The use of
tools or accessories other than those recommended in
this operating manual may place you in danger of
personal injury.

GENERAL SAFETY RULES
WARNING!

Read all instructions Failure to follow all

instructions listed below may result in electric shock,
fire and/or serious injury. The term "power tool" in all of
the warnings listed below refers to your mains operated
(corded) power tool or battery operated (cordless)
power tool.

Содержание PROFYT9021-12









































Отзывы: