8
After a short period of automatic testing, the probe is ready to run. The instrument automatically
enters the metal detection function mode. At this time, if there is a signal display in the detection
signal strength display area (18) without metal interference it indicates that calibration is
required.
CALIBRATION METhOD
Place the instrument in an environment free
from metal and strong magnetic field
interference. We recommend lifting the
instrument into the air by hand and then press
and holding the detect metal or cable button
(shown on the right). Keep the button pressed
until the detection signal strength display area
shows 0% and the green light at the top of the
unit is illuminated. Once the green light is
illuminated the calibration is complete and
you can release the detect metal or cable
button.
DETECTING METAL OBJECTS
The maximum metal detection depth is
120mm.
Press the metal detect button (7) to enter
metal detection mode. The metal detection
icon will appear on the screen and the green
indicator light will illuminate.
Place the detector on the surface you wish to
scan and move the instrument slowly to the
left or right. As the instrument gets closer to
the metal object, the scale on the detection
signal strength display area (18) will gradually
rise and the intensity percentage will
gradually increase. As the instrument moves
away from the object, the scale drops and the
intensity percentage decreases.
%
cm
%
N S
cm
Содержание 502291833
Страница 106: ...106...