MOTORISED MIRROR BALLS MODELS PLSS20 / PLSS30 / PLSS40 / PLSS50
Before connecting check if mains has an earth connection suitable to the characteristics of the appliance.
The mains should be connected to a 230V – 50/60 Hz cycle outlet, with an amperage of at least 1A.
Prior to any manual intervention on the appliance, disconnect the mains plug and check there is no pres-
ence of voltage in the unit.
Please follow these recommendations for a correct operation:
- Do not start operating the PLSS before this has reached the optimal room temperature, to avoid mois
ture factor.
- Avoid dipping any flammable liquid, water or metal objects inside the appliance
- Follow scrupulously the printed instructions on the label placed on the appliance.
- Do not use the appliance in places where temperature is below 0° C.
- Do not use the appliance for long time in places where temperature is higher than 40°C.
- Do not use the appliance in environments submitted to vibrations or possible impact.
- Keep out from heath sources to avoid detachment of the mirror glasses from the ball.
Any technical servicing should be effected only by qualified and authorised personnel to avoid cancelling
of the warranty which operates only if there has not been any unauthorised repair.
Please strictly follow above instructions and what is printed on the label attached to the appliance.
DO NOT PLACE THE PROJECTOR NEXT TO ELECTRICAL OUTLETS OR ELECTRICAL SWITCH-BOXES
Technical Specifications
Weight: PLSS20 (2 Kg) / PLSS30 (3 Kg) / PLSS40 (4,7 Kg) / PLSS50 (7,2 Kg)
Measures (Ø) : PLSS20 (20 cm) / PLSS30 (30 cm) / PLSS40 (40 cm) / PLSS50 (50 cm)
Consumption: 1 A
The PROEL technical department is available for any clarification concerning this product.
3
