Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See
Cleaning for details.
Heat -The appliance should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances (including amplifiers) that produce heat.
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilling to the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked change in
performance.
2. Introduction
2.1 Features
Multi-Colors
Color Strobe
Electronic Dimming 0-100%
Built in Microphone
DMX-512 Control
Auto/Master & Slave synchronization
Multi-channel mode
Dip switch to choose menu
2.2 DMX Channel
Channel Function
1
DIMMER
2
RED
3 GREEN
4
BLUE
5
7 COLOR CHANGES
6 COLOR
SHADE
7 STROBE
8 SOUND
ACTIVATED
3. Set up
Disconnect the power cord before replacing a fuse and always replace with the
same type fuse.
Power Supply: Before plugging your unit in, be sure the source voltage in your area
matches the required voltage for your fixture.
3.1 Fuse replacement
With a flat head screwdriver wedge the fuse hold out of its housing. Remove the
damaged fuse from its holder and replace with exact same type fuse. Insert the fuse
holder back in its place and reconnect power.
3.2 Fixture linking
You will need a serial data link to run light show of one or more fixtures using a DMX-512
11