PROEL PLAB4ML, Руководство пользователя

Страница: 16 / 24

16
•
Install the light fixture in a place that is well ventilated. Pay
attention to checking if the fan and fan net are smooth.
•
The PLAB4ML Blinder moving head uses the 3A /250V safety
fuse. Please use a fuse with the same specification.
RIGGING
DANGER TO LIFE: Please consider the respective national norms
during the installation. The installation must only be carried out by an
authorized dealer.
The installation must always be secured with a secondary safety
attachment safety rope). This secondary safety attachment must be
constructed in a way that no part of the installation can fall down if the
main attachment fails. A safety rope which already hold the strain of a
crash or which is defective must not be used again.
Unscrews 4 screws (3) on the base. Screw one clamp each and nut
onto the Omega-holders. Insert the quick-lock fasteners of the first
Omega-holder into the respective holes on the bottom of the device.
Tighten the quick-lock fasteners fully clockwise. Install the second
Omega-holder.
Use 2 appropriate clamps to rig the fixture on the truss; make sure that
the device is fixed properly; make sure that the structure (truss) to
which you are attaching the fixture is secure.