PROEL LED POWER RGB, Руководство пользователя

Страница: 27 / 34

CHANNEL 6: STROBE
This channel sets the parameters of the strobe effect.
On the following table you have the dmx values, the strobe frequency (flash speed) and the strobe hold.
CHANNEL 7: STROBE DELAY
This channel allows a time delay on the strobe frequency, to have a series of projectors executing strobe effects in
sequence.
Example: set 4 projectors on dmx value 48 of the strobe channel will strobe at the same time with a frequency 0.1
seconds (see the previous table). Setting the 4 projectors on the strobe delay channel: 1
st
projector dmx value 11; 2
nd
projector dmx value; 3
rd
,
projector dmx value; 4
th
projector dmx value 19. After that the projectors will execute in
sequence the strobe (lasting of the flash is 0.04 seconds), every 0.2 seconds they will start the sequence from the
beginning.
The strobe delay time has to be lower than the strobe hold time.