11
31.
IR RECEIVER
This is the remote control IR receiver.
32.
LCD DISPLAY
The LCD DISPLAY shows several data:
33.
POWER
Use this switch to power ON or OFF the FREEPACK812. The
FREEPACK812 is "ON" when the switch is in the "I" position.
34.
AC~ SOCKET
Here’s where you plug in your mains supply cord. You should
always use the mains cord supplied with the device. Be sure
that your device is turned off before you plug the mains supply
cord into an electrical outlet.
35.
FUSE holder
Here is where the mains protection fuse is placed.
REPLACE THE PROTECTION FUSE ONLY WITH THE
SAME TYPE.
IF, AFTER THE REPLACEMENT, THE FUSE INTERRUPTS
AGAIN, DO NOT TRY AGAIN THEN CONTACT THE PROEL
SERVICE CENTER.
36.
LINE VOLTAGE
This switch sets the AC voltage line of your country (usually it is set
by factory and isn't necessary to change it). The 115V setting is for
mains line in the range of 105-120V~ and 230V setting is for mains
line in the range of 210-240V~.
WARNING: an incorrect setting of AC LINE VOLTAGE could damage seriously the internal
electronics!