19
Nota: The standards package is including two palmar wireless microphones (
fig.3
) whilst bodypack (
fig.4
)
transmitter
are optional
.
fig.5
1
Antenna
2
Wireless microphone volume
3
RF synchronization led indicator
4
Vu- meter signal in receipt indicator
FREE50V2 is supplied with Two receivers (
fig.5
) and with two VHF wireless transmitters
(fig.3)
, For use
the necessary steps are as follows:
•
Install the two antenna included in the supply in vertical positions (
fig.5 ref.1
)
•
Insert 9V battery correctly in the dedicated compartment (
fig.3,4 ref.1
)
•
Power on the transmitters (
fig.3 ref.2 - fig.4 ref.3
) and set reproduction volume (
fig.5 ref.2
) of each
transmitter. Power on the wireless microphone, the relevant RF led will light indicating that the
receiver is synchronized to transmitter frequency range
(fig.5 ref.3)
,While the respective v-meter
(fig.5 rif.4)
will visualize on the receiver the relevant wireless audio signal level transmitted.
Nota: On palmar microphone , commuting the selector on position PWR (
fig.3 ref.2
) the radio
transmitter is powered ON and the range is transmitted. Contemporaneously Power led (
fig.3 ref.3
)
is activated .Commuting subsequently the selector (
fig.3 ref.5
) on position ON the audio signal
reported by the microphone is transmitted
Remove batteries in case of long period or non units use.
1
Battery compartment
2
ON/OFF switch
3
ON microphone status indicator.
4
When led lights, it indicates, independently
of light colour , the battery discharge
5
Mute key
6
Microphone capsule
1
Microphone compartment
2
Microphone input connector
3
Power ON/Stand by switch
4
when the LED is On the battery is
discharged
5
Lavalier Microphone
6
Antenna
