PROEL BMG1, Инструкция по эксплуатации

Страница: 5 / 8

Thank you for choosing a Proel product, and for your confidence towards our brand, synonymous
with professionalism, high quality and reliability.
Description
Professional table microphone, with die-cast zinc base, high sensitivity condenser microphone
capsule, flexible gooseneck, illuminated ring to indicate operating condition, and on/off switch*.
Perfect for all PA applications, such as conference and paging. It can be powered by battery or as
by Phantom power.
*
Version
BMG1SI
doesn’t have on/off switch and it can be powered by phantom power only.
This product complies with CE directives.
Precautions
•
Before installing this unit please carefully read these instructions, and keep this owner’s
manual for future reference.
•
WARNING: improper installation could irreparably damage the unit.
•
Be careful that unit operation may not cause damage to people.
•
Place the unit in a location protected from weather and far from water and moisture.
•
Don’t place this unit close to heat sources (radiators, spotlights, amplifiers etc.)
•
Avoid any liquid entering inside the unit
•
No user-serviceable parts inside. Refer servicing to an authorized maintenance centre only.
Installation
1. Insert two AA 1,5V batteries in battery compartment under the microphone base, respecting
the polarity indicated inside the compartment.
Note: using Phantom power, batteries are not necessary.
2. Being careful about mounting direction, insert the gooseneck connector on microphone base
surface XLR connector and lock the locking threaded ring, without using excessive force.
3. Connect microphone base to an external unit (mixer, amplifier, etc.) using supplied cable. If
the external unit microphone input can supply Phantom power, apply it to this microphone by
switching Phantom power on.
Note: before connecting the microphone to the external unit, it must be turned off and with its
volume settings at minimum.
4. First of all turn on the microphone, then the unit and adjust its volume do desired level.
5. In order to obtain a perfect sound reproduction, the user should maintain a distance between
5 cm. (2”) and 30 cm. (12”) from microphone capsule.
WARNING
To avoid risk of electric shock, please don’t open the
product.
To prevent risk of fire or electric shock, don’t expose
this product to water and/or moisture.