PROEL ATMP240ZXL, Руководство пользователя

Страница: 15 / 48

15
OBSERVE ALL THESE WARNINGS:
•
DO NOT CONNECT MIXED CONSTANT IMPEDANCE (4 Ω or 8 Ω) AND CONSTANT VOLTAGE (70V or
100V) SPEAKERS.
• CONNECTING CONSTANT IMPEDANCE (4 Ω or 8 Ω) LOUDSPEAKER IT IS ADVISABLE TO REDUCE AS
MUCH AS POSSIBLE THE WIRES’LENGTH AND TO INCREASE THE CABLE SECTION ACCORDING TO
THE DISTANCE COVERED.
• THE TOTAL POWER HANDLING OF CONSTANT IMPEDANCE (4 Ω or 8 Ω) SPEAKER MUST BE AT
LEAST 240W CONTINUOS.
•
WHEN CONSTANT IMPEDANCE SPEAKERS (4 Ω or 8 Ω) ARE CONNECTED, IT IS FORBIDDEN TO
CONNECT CONSTANT VOLTAGE LOUDSPEAKERS ON ANY GENERAL AND ZONE OUTPUTS.
•
THE TOTAL POWER OF CONSTANT VOLTAGE (70V or 100V) LOUDSPEAKERS CONNECTED MUST
NOT EXCEED 240W CONSIDERING BOTH GENERAL AND ZONE OUTPUTS.
• ALL THE LOUDSPEAKERS CONNECTED TO CONSTANT VOLTAGE OUTPUTS (70V or 100V) MUST
BE EQUIPPED WITH A TRANSFORMER HAVING AN INPUT VOLTAGE EQUAL TO THAT SUPPLIED
BY THE AMPLIFIER.
• TO AVOID THE RISK OF ELECTRIC SHOCKS, NEVER TOUCH THE AMPLIFIER OUTPUTS DURING
OPERATION.
Constant impedance line connection examples:
Constant voltage line connection examples:
23 ZONE LOUDSPEAKER OUTPUT
This is a 5.08 mm pitch Euroblock connector. This connector can accept 0.5÷2.5 mm 2 / 20÷14 AWG size
cables, a Class 2 wiring is needed for fixed installation.
Connect to these separate zone outputs only constant voltage speakers at 100V.