8
14.1
Constant impedance line
Connect the constant impedance line between “COM” and “4Ω” or “8 Ω” terminals.
•
To ensure maximum performance, the total impedance of the loudspeakers connected to the
line must be equivalent to the output impedance of the amplifier.
•
The total power of the connected loudspeakers should not be lower than the amplifier‘s output
power.
•
It is advisable to reduce as much as possible the wires’ length and to increase the cable section
according to the distance covered.
14.2
Constant voltage line:
Connect the constant voltage line (100V or 70V) between “COM” and “100V” (or “70V”) terminals.
•
All the loudspeakers must be equipped with a transformer having an input voltage equal to that
supplied by the amplifier.
•
The sum of the loudspeaker power must not exceed the maximum output power of the
amplifier.
15
AC~ SOCKET
Here’
s where you plug in your mains supply cord. You should always use the mains cord supplied with
the device. Be sure that your device is turned off before you plug the mains supply cord into an electrical
outlet.
