PROEL AMP 120Z4, Инструкция по эксплуатации

Страница: 9 / 18

•
MAIN IN and PRE OUT.
MAIN IN input is connected to PRE OUT output by a jumper. It’s
possible to obtain a better performance of amplified sound inserting
an external unit (i.e. equalizer, processor etc.). Please see the
following picture for proper wiring.
•
IEC AC power connection.
To connect this unit to AC power outlet, please use the supplied AC
linecord. (
fig. 2 ref. 1
).
Attention
Before connecting the unit to AC power, please control that the
power selector (
fig.2 rif.17
) matches your local AC power value.
•
TEL.PAGING input
This input allows you to connect a telephone signal (600
Ω
) with
priority over all the other signals
(fig. 2 ref. 2).
Signal volume may be set using the TEL.VOL. trimmer located on
unit rear panel
(fig. 2 ref. 14).