Prodys QUANTUM LITE, Быстрое руководство

Страница: 9 / 26


Prodys S.L. Tel: +34 91 6896880 Θ Fax: +34 91 6943777 Θ Email: sales@prodys.net Θ Web: www.prodys.com
Page 9
The < Menu > icon accesses to the configuration parameters if required.
The < Monitor > icon accesses the status information for the current
communication if desired.
Remark: You might skip one menu back or go directly to the main menu from
any deeper menu level with following controls, located in the upper left side of
any menu window.
II.3 Some facts before you might proceed using your handheld codec
Some settings must be provided for the handheld codec and its companion QLST
at your studio before any communication is possible. If these preparations
already took place, please refer to the next section.
II.3.1 Installing the QLST at the studio site
The QLST device must be connected to your Local Area Network and the access
for external TCP/UDP ports must be granted. Please request at your company IT
department assignation for your public IP address router (Port Forwarding at
your Internet router) for
port 53000 TCP & UDP service .
Remark: Please notice if several QLST devices are going to be used behind the
same Internet router, each QLST should get a different port assignment. Small
offsets would let addressing each QLST individually. E.g. first QLST
port 53000,
second QLST port 53010, third QLST port 53020, etc.
In QLST the factory default Ethernet port to be used is labeled LAN1. For any
other arrangement please check document “QLST Hardware and Reference
Manual”.