Prodys S.L. Tel: +34 91 6896880
Fax: +34 91 6943777
Email:
Web:
www.prodys.com
Page 108
UPDATING THE FIRMWARE
To update the firmware of a Quantum unit follow these steps:
1.
Make sure your Quantum and the computer to be used for the update are
connected to the same LAN. Of the two Ethernet interfaces available in
Quantum, the update operation is always done through the labeled LAN1:
2.
If you have not set up a LAN network, it is also possible to connect the
computer and the Quantum LAN1 port directly through a standard or
crossover CAT-5 cable. The Ethernet port on the computer automatically
adjusts to the type of cable.
Chapter VI
