
Mounting your device
7.
Add the two adhesive strips
horizontally
to the
backside
of the ProDVX GM-75
Mount frame
a
nd remove the yellow paper from the two adhesive strips
.
8.
Firmly press the ProDVX GM-75 Mount frame onto the Glass Mount Cover Sticker
and hold
for ten seconds
.
9.
Screw the four VESA screws into your 10" display
's VESA holes
. Tighten the screws
by
hand as they should stick out a few mm for affixing into the keyhole
s
.
10.
Align the screws on the back of the tablet with the four large keyholes on the
ProDVX GM-75
Mount frame and slide from left to right until you hear a click!
11.
Insert the two included safety screws into the top of the mounting plate.This will
lock the
mounting screws into place
.
7
1
0
11