Production Basics, Inc. Massachusetts, USA 800.318.2770 617.926.8100 Fax: 617.926.8010 www.pbasics.com
A S S E M B L Y M A N U A L
ASSEMBLY VIDEOS AVAILABLE ON-LINE http://video.pbasics.com
• Note: To install Overhead Arms only, perform
steps 3 & 4.
1.
Unscrew 2 security screws on face of light unit.
Remove plastic diffuser.
2.
Insert T8 light bulbs into fixture. Plug light in to test
correct installation of bulbs. Replace diffuser and security
screws.
3. Insert two (2) Basic Bolts into mounting plate on
Overhead Arm. Secure with Basic Nut with grooves
facing the back of the mounting plate. Turn only one
revolution. Repeat for other Overhead Arm.
4. Insert Basic Nuts attached to Overhead Arm mounting
plate into frame channel of workstation or Uprights and
turn Basic Bolt 90 degrees clockwise to grip. Top of
mounting plate should be flush with top of frame cross
member. Tighten the bolts. Repeat for other Overhead
Arm.
5. Insert 4 Basic Bolts from bottom into light mounting plate.
Secure with 4 Basic Nuts with grooves facing down. Turn
only one revolution.
6. Position light unit with cord facing the frame. Insert Basic
Nuts attached to light unit into Overhead Arm channel
and turn Basic Bolt 90 degrees clockwise to grip.
7. Slide the light unit to the desired position. Tighten the
bolts. Slide End Caps onto front ends of Overhead Arms.
OVERHEAD LIGHT & OVERHEAD ARMS
Item Numbers 8500, 8504, 8505, 8510, 8512, 8514, 8516, 8518, 8538
ACCESSORIES
PARTS AND HARDWARE
QUANTITY
Overhead Arms
2
End Caps
2
Basic Bolts
4 (Arms only)
8 (With light)
Basic Nuts
4 (Arms only)
8 (With light)
Light Unit
1
7/32 Allen Wrench
1
Other Items Needed (not included)
24” T8 bulb for 36”
3
36” T8 bulb for 48”
3
48” T8 bulb for 60” & 72”
3
Phillips head screwdriver
Tape Measure
Diffuser
Overhead Arm
mounting plate
Security Screws-
REMOVE BEFORE
STARTING ANY
ASSEMBLY
Light Mounting Plate
Overhead Light on Frame
Overhead Light on Uprights
Security Screws-
REMOVE BEFORE
STARTING ANY
ASSEMBLY
1602A101
6
