E. DESCRIPTION OF THE SAFETY ALARM
12. Cord connected to the pull pin for activating the alarm
Batteries required for the safety alarm: 1 x 23 A, 12 V battery
How to change the battery:
1. Unscrew the screws at the back of the safety alarm to remove the battery compartment cover.
2. Remove the used 23 A battery and insert a new battery making sure to respect the (+) and (-)
polarity.
3. Before closing the battery compartment, make sure to place the slot on the side where the pull
pin is located.
Note: When placing the alarm in the pocket (3), the pull pin cord must be facing downwards and
passed through the hole in the pocket.
F. HOW TO SET OFF OR TURN OFF THE ALARM
To set off the alarm, pull
the cord connected to
the pull pin on the safety
alarm
To stop the alarm,
replace the pull pin back
into the hole on the
safety alarm
WARNING: You should not dispose of this device with your household waste. A selective collection system
for this type of product is implemented by your local authorities. Please contact your local authorities to
find out how and where collection takes place. These restrictions apply because electrical and electronic
devices contain dangerous substances that have harmful effects on the environment or on human health
and must be recycled.
This symbol indicates that electrical and electronic devices are collected selectively. The symbol shows a
waste container crossed out with an X symbol.
Imported by
EML/ Prodis, 1 rue de Rome, 93110 Rosny-sous-Bois, France
Marketed by EUROTOPS VERSAND GMBH D-40764 LANGENFELD, Germany
Made in PRC
Figure 3 - Safety alarm
ANTI-THEFT
ALARM
