•
Set button which is located on the back of solar case to
“ON” position for charging. Charge the solar product by
direct sunlight for at least 8 hours.
•
Solar light will work automatically, it will automatically
charge under direct sunlight during the day time and
illuminate at night.
NOTE: In order to verify that the button is correctly in the “ON”
position, cover the solar panel with your hand and light should
turn “ON” automatically.
IMPORTANT
•
Install the solar product in an area where it can get direct sunlight.
•
Leave the button to “ON” position.
•
Select an outdoor location away from other light sources at night, such as street
lights. It may cause the product not to turn on automatically at night.
•
Duration of light depends on solar product’s level of sunlight exposure, geographical
lo- cations, weather conditions and the hours of daylight.
E. BATTERY INSTALLATION
Step1: Unscrew the battery compartment cover by using a head screwdriver (not included).
Step2: Remove the exhausted battery and install 1pc new AA rechargeable battery
according to the +/- symbol polarity indicated on the battery compartment.
Note: Open the compartment carefully and ensure that welding wires inside the battery
terminals are not damaged.
Step3: Replace battery compartment cover, screw it back into position and make sure is
properly sealed.
Fig.1
Fig.2
Fig.3