Copyright © 2008 IPE Music
Thank you for choosing this Prodipe product.
Safety Information:
To ensure both your safety and the proper functioning of this product, please take the time
to read the safety instructions on the back cover.
WARNING. To avoid any possibility of electric shock, please do not remove the back of this
product. For any repair work please contact either the shop where you purchased the
product or a qualified technician.
Before using the STC-3D, we recommend that you read this instruction booklet carefully.
User Information:
1. Connect your mic to your amp or your mixing deck.
Switch on your your amp/mixing deck and put the volume at minimum.
Switch on the phantom power and adjust the gain (see instructions for your mixing deck
or amp).
2. Do not cover the mic, for example, with your hand, and if you want to avoid the Larsen
effect, do not bring the mic too close to the monitors.
3. The capsule is very sensitive. Strong physical shocks can cause damage to the mic. Please
handle it with care.
4. If you want to maintain the mic’s excellent quality and sensitivity, do not expose it to dust
or high temperatures.
5. The specifications in this manual are subject to change without prior notice.
Technical Specifications:
•
Type: condenser mic
•
Large capsule: Ø 34 mm
•
Polar pattern: Uni/Bi/Omni
•
Frequency Response: 20Hz-20kHz
•
Sensitivity: -31dB/-34dB/-35dB±2Db (0dB=1V/Pa to 1kHz)
•
Output Impedance: 200Ω±30%(1kHz)
•
Equivalent Noise Level: 14/15/16dB A
•
Maximum SPL: 130dB (1kHz ≤1% T.H.D) 140dB (with 10dB pad)
•
Phantom Power: 48V DC
•
S/N Ratio: 80/79/78dB
•
Weight: 590 g
•
Dimensions: Ø54x201 mm