Version : V1.3 sep-15
Page
2
of
4
Safety
Steps
1.
Unscrew the 4 bolts under the carrier.
2.
After that you can turn the Extruder away. Now you will see
the top of the hotend.
PAY ATTENTION TO THE CABLES!!!
3.
Unscrew the brass nut of the Hotend with a 10mm wrench.
4.
Remove the hotend form the Carrier.
PAY ATTENTION TO THE CABLES!!!
Safety alert symbols precede each safety message in this
manual. These symbols indicate potential safety hazards that
could harm you or others or cause product or property damage.
