Prodigit 3301A, Руководство по эксплуатации

Страница: 20 / 25

3301A MAINFRAME OPERATION MANUAL 17
ˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍ
Purpose :
Short the DC input of Electronic load.
Command syntax :
SHOR[:TRIG]{SP}{ON｜OFF}{;NL}
Description :
This command applies the short across the input of the Electronic load. The maximum short
resistance is 0.03, 0.02 and 0.04 ohms for 3320, 3321 and 3322 Electronic load module
respectively.Excuting SHOR does not effect any programmed settings and the Electronic load
will return to them when the short is removed.
Example :
a.SHOR ON
b.SHOR OFF
c.SHOR：TRIG ON
SLEW
Purpose :
SET the slew rate of load current change.
Command syntax :
SLEW{SP}{1｜2}{;NL}
Description :
This command selects the load current slew rate SLOW, MIDDLE and FAST with its code 1, 2
and 3 respectively. The code for each slew rate is shown in Table 4-4.For detail load
current slew rate for SLOW, MIDDLE, FAST, and each model of 3320 series Electronic load
module, please refer the 3320 series Electronic load operation manual. Table 4-4 slew rate
code for SLOW, MID, AND FAST.
SLEW RATE CODE
SLOW 1
MIDDLE 2
FAST 3
Table 4-4 Slew rate code for SLOW, MID, and FAST
Example :
a.SLEW 1
b.SLEW 2
c.SLEW 3