12
n)
Watching for obstacles around you
Your new Storm travels at higher speeds than most riders are accustomed to, when compared to pedaling a traditional bicycle. It
is very important you are aware of your surroundings and obstacles which may appear near you. You must watch the road
surface you are traveling on which could cause the tires to slip or cause a flat. Examples are soft shoulders, rocks, pot holes,
uneven paths, grates, construction sites. Due to the higher rate of speed when riding under motor power versus pedaling, objects
will advance into your path at a faster rate. Pay attention to other riders in your area, automobiles, motorcycles, pedestrians, poles,
intersections and road signs to name a few. The Storm resembles a traditional bicycle and people walking, driving or standing
may not realize you are on a motor powered vehicle and misjudge your traveling speed.
WARNING:
Hitting a pot hole, soft shoulder or other road deviation may cause you to lose control, be
thrown and cause serious injury or death.
o)
Safe riding in various conditions
Riders may find themselves riding in a condition they did not plan on encountering. It is important your new Storm is
maintained properly for optimum performance. Please read Chapter 7 on the details required to keep your electric bicycle at its
best. An unexpected rain storm, snow flurry or night ride could arise during a day’s trip and you should always be prepared.
Please read Chapter 4 on Safety, so upon encountering an unexpected riding condition, you will be confident and ready.
p)
Charging your battery
The Storm
’s battery system is the safest and latest technology in Lithium Ion battery cells and was designed to be easily
charged. Chapter 8 offers a detailed explanation on battery management but the following information is a basic guide in
charging your battery. The battery is a removable device and can be charged on or off the bicycle. If removing the battery
to charge it, please follow these instructions.
Locate the key ignition on the battery and turn the key in a counter clockwise rotation to the
―UNLOCK‖
position.
You must push the key in to turn from the ―OFF‖ position to the ―UNLOCK‖ position.
Grab the handle at the back of battery and carefully pull towards the back of the bicycle to slide off.
The battery is now transportable and can be charged away from the bicycle
when in ―UNLOCK‖ position.
For charging, please review the following instructions.
Lift up the handle of the battery to access the RCA charging input.
Insert the charging plug from the
charger into the battery’s RCA charging input.
Insert the
charger’s power cord into a wall outlet.
The charger’s LED light will light RED while the charger is charging the battery.
The charge
r’s LED light will light GREEN upon the battery being fully charged.
There is also a battery indicator for checking
a full charge. Press the indicator button to display the battery’s
energy storage. The indicator
is located on top of the battery.
Once the battery is fully charged, you should discontinue charging and remove the charger.
Unplug the
charger’s power cord from the wall and remove the charging plug from the battery.
You are ready to install the battery pack back onto your bicycle.
To install the battery, first align the bottom of the battery with the battery base rail.
Once aligned, slide the
battery firmly into the battery base and until the battery base terminals insert into the
battery’s terminal outlets. The battery’s locking slots must slide properly onto the mount’s 3 metal tabs.
Once the battery is properly slid into place,
you can then turn the key to the ―ON‖ position.
The LEDs on the throttle
in the ―ON‖ position will display a charged battery’s energy capacity.
Chapter 4: Safety
The manual has detailed safety riding methods. In this chapter we will further discuss additional safety guidelines.
a)
The basics
Below is a safety guideline according to the CPSC (US Consumer Product Safety Commission) in regards to riding a bike.
Always wear a
helmet to help prevent head injuries.
Observe all traffic laws and signals, just as automobiles must do.
Don’t ride double or attempt stunts.
Ride near the curb in the same direction as traffic.
Find alternate routes, rather than ride through busy intersections and heavy or high-speed traffic.
Walk -- don't ride -- your bicycle across busy intersections and left turn corners.
Avoid riding in wet weather. When wet, handbrakes may require a long distance to stop.
Avoid riding in the dark. If you do, be sure the bike is equipped with a headlight, a taillight and reflectors.
Apply retro-reflective trim to clothing, or wear reflective vests and jackets.
Avoid loose clothing or long coats that can catch in pedals or wheels. Leg clips or bands keep pants legs
from tangling in the chain.
Avoid crossing raised sewer grates.
Regular maintenance is essential for safe riding. Refer to the maintenance recommendations. If you do not
have basic mechanical skills, an authorized dealer should perform repairs and maintenance.
Align (or "true") wobbly wheels for better control. Spokes also may need adjustment.
Replace all missing, damaged, or worn parts; for example, brake pads, chainguards, chain links, spokes,
screws and bolts, handlebar grips.
Tighten and/or adjust loose parts.
